Pipe Elbow Fittings
Pipe elbow fittings is a very important pipe fitting. When we talk about a pipe elbow, it means a length of pipe with a sharp bend in it. Pipe elbows are fitting accessories which are used widely in various industrial sectors in pipe fitting. A pipe elbow is frequently used in pressurized applications and are available in various shapes and sizes for use in different applications. A pipe elbow is a fitting installed between two lengths of pipe or tube allowing a change of direction, usually in the 90° or 45° direction.
- The elbows are constructed of heavy materials for rigid applications like extreme high/low temperature resistance etc.
- The elbows are specifically designed for use on process and control systems, instrumentation, and equipment used in chemical, petroleum, fluid power, electronic and pulp and paper plants.
Pipe Ferrule
Malleable fittings are usually used to connect steel pipes. However, galvanized malleable fittings are used for galvanized pipe. Malleable iron pipe fittings are most common among malleable fittings and are available in many different types and sizes.
- Pipe ferrules are used widely in compression fittings for attaching piping.
- They are used with the connector to connect the fiber cable either to another cable or to a transmitter or receiver.
- Pipe ferrules keep the fibers accurately aligned within the connector.
- Pipe ferrule is used to align and protect the stripped end of a fiber.
Pipe Nipples Fittings
A pipe nipple is a length of straight pipe with male threads on both ends. It is one of the most popular category of pipe fittings. It is a connector or a coupling threaded on both ends. Pipe nipples are used to allow plumbing to be connected to a water heater or other plumbing. They are used to fit straight end hose or pipe. A combination of pipe nipples are recommended for low-pressure discharge and suction service for various compatible liquids and not for compressible products like air, nitrogen or steam.
- Black coating
- Electro galvanized
- Hot-dipped galvanized finishes
- Copper plating etc.
Pipe Plug Fittings
Pipe plugs are defined as cap end of fractional tubes used in a large number of industries. These pipe plugs are designed to insert into the end of tubing to dead-end the flow. Various materials are used to manufacture high quality tube plugs in a variety of end connections.
- Hydraulic system
- Pneumatic system
- Pharmaceutical fittings
- Air brake fittings
- Gas fittings
- Refrigerant fittings etc.
The Best Luxury Real Estate
Work With Us
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
